virtual worlds 2009

Painting Walls

cat July 24th, 2014 by Virtual Keeper

Preparation for painting before painting the walls need to close all the furniture and floor with foil or newspaper in order that they can not hit the paint. Then remove all the sockets and switches, remove the baseboards. The next step – is to prepare the surface on which we will apply the paint. Walls should be clean and dry, have a sufficient bearing capacity. If there is loose on the walls of plaster, it should be removed. To check the surface can be use a damp cloth dark. If there are traces of chalk, should be primed base. Porous surfaces should be abrasive and primed deep penetration.

Porosity can be check roller or sponge soaked when water soaks into the ground, a must-priming. Putty before priming should all cracks and irregularities. Primer is applied copiously on the surface, mostly flat by brush or roller. Painting the walls in the first brush painted ledges, corners and various architectural details. For painting flat areas of the walls using a roller.

To paint was applied evenly before applying the roller to hold a paintbrush on the board to remove excess paint. The first coat of paint is applied slightly diluted. The next layer is applied will not dilute the paint and in the longitudinal towards the walls. Then again, a cover layer in the transverse direction, and then again lengthwise. To make the surface of individual character, you can use different tools and how to create decorative elements. Upon completion, paint tool should be rinsed under running water.

cat Category: General | comments Comments Off on Painting Walls

Comments are closed.

|